NUR 630 Which performance improvement theory or model would you use to address it?

Grand Canyon University NUR 630 Which performance improvement theory or model would you use to address it?-Step-By-Step Guide

This guide will demonstrate how to complete the Grand Canyon University NUR 630 Which performance improvement theory or model would you use to address it?  assignment based on general principles of academic writing. Here, we will show you the A, B, Cs of completing an academic paper, irrespective of the instructions. After guiding you through what to do, the guide will leave one or two sample essays at the end to highlight the various sections discussed below.

How to Research and Prepare for  NUR 630 Which performance improvement theory or model would you use to address it?                                                                             

Whether one passes or fails an academic assignment such as the Grand Canyon University  NUR 630 Which performance improvement theory or model would you use to address it?   depends on the preparation done beforehand. The first thing to do once you receive an assignment is to quickly skim through the requirements. Once that is done, start going through the instructions one by one to clearly understand what the instructor wants. The most important thing here is to understand the required format—whether it is APA, MLA, Chicago, etc.

After understanding the requirements of the paper, the next phase is to gather relevant materials. The first place to start the research process is the weekly resources. Go through the resources provided in the instructions to determine which ones fit the assignment. After reviewing the provided resources, use the university library to search for additional resources. After gathering sufficient and necessary resources, you are now ready to start drafting your paper.

How to Write the Introduction for NUR 630 Which performance improvement theory or model would you use to address it?                                                                           

The introduction for the Grand Canyon University NUR 630 Which performance improvement theory or model would you use to address it?   is where you tell the instructor what your paper will encompass. In three to four statements, highlight the important points that will form the basis of your paper. Here, you can include statistics to show the importance of the topic you will be discussing. At the end of the introduction, write a clear purpose statement outlining what exactly will be contained in the paper. This statement will start with “The purpose of this paper…” and then proceed to outline the various sections of the instructions.

How to Write the Body for NUR 630 Which performance improvement theory or model would you use to address it?                                                                           

After the introduction, move into the main part of the  NUR 630 Which performance improvement theory or model would you use to address it?   assignment, which is the body. Given that the paper you will be writing is not experimental, the way you organize the headings and subheadings of your paper is critically important. In some cases, you might have to use more subheadings to properly organize the assignment. The organization will depend on the rubric provided. Carefully examine the rubric, as it will contain all the detailed requirements of the assignment. Sometimes, the rubric will have information that the normal instructions lack.

Another important factor to consider at this point is how to do citations. In-text citations are fundamental as they support the arguments and points you make in the paper. At this point, the resources gathered at the beginning will come in handy. Integrating the ideas of the authors with your own will ensure that you produce a comprehensive paper. Also, follow the given citation format. In most cases, APA 7 is the preferred format for nursing assignments.

How to Write the Conclusion for NUR 630 Which performance improvement theory or model would you use to address it?                                                                           

After completing the main sections, write the conclusion of your paper. The conclusion is a summary of the main points you made in your paper. However, you need to rewrite the points and not simply copy and paste them. By restating the points from each subheading, you will provide a nuanced overview of the assignment to the reader.

How to Format the References List for  NUR 630 Which performance improvement theory or model would you use to address it?                                                                             

The very last part of your paper involves listing the sources used in your paper. These sources should be listed in alphabetical order and double-spaced. Additionally, use a hanging indent for each source that appears in this list. Lastly, only the sources cited within the body of the paper should appear here.

Stuck? Let Us Help You

Completing assignments can sometimes be overwhelming, especially with the multitude of academic and personal responsibilities you may have. If you find yourself stuck or unsure at any point in the process, don’t hesitate to reach out for professional assistance. Our assignment writing services are designed to help you achieve your academic goals with ease. 

Our team of experienced writers is well-versed in academic writing and familiar with the specific requirements of the  NUR 630 Which performance improvement theory or model would you use to address it?  assignment. We can provide you with personalized support, ensuring your assignment is well-researched, properly formatted, and thoroughly edited. Get a feel of the quality we guarantee – ORDER NOW. 

Sample Answer for NUR 630 Which performance improvement theory or model would you use to address it?

Topic 3 DQ 1

An upward trend of a same procedure is likely due to a system failure in blood product administration and not an individual failure. As blood administration errors can be fatal, it is important to eliminate such errors in the future. Analyzing where the error is occurring is important to remove or correct the process. I will use the Six Sigma model to address this issue as it has a high rate of improving processes (Johns Hopkins Nursing, n.d.). The  Define- Measure-Analyze- Improve- Control (DMAIC) method will be utilized. In this scenario, define: Aim to administer blood without any errors Involve staff from blood bank , nurses. Measure: What errors are happening in the current administration processes- is it blood bank related? Patient verification and product request by nurse-related? Blood product and nurse verification or documentation-related? Analyze. The current process will be analyzed, and root of the cause will be identified. Improve- the problem will be corrected, if it involves another department. The new process will be discussed with leaders in respective departments and new intervention will be applied. Control: The blood administration process will be monitored for any further errors or to understand how the new intervention is working and make necessary changes.

Johns Hopkins Nursing (n.d.). Quality improvement. https://www.hopkinsmedicine.org/nursing/center-nursing-inquiry/nursing-inquiry/quality-improvement

Sample Answer 2 for NUR 630 Which performance improvement theory or model would you use to address it?

In order to fully determine if this is an individual failure or system failure, a root cause analysis will need to be conducted. Najafpour et al. (2017) states that “Ordinarily much attention is paid to the safety of the blood products prior to transfusion, and not necessarily to the processes involved in the actual blood transfusion at bedside where approximately 70% of the errors have been reported to occur. Therefore, in every step of blood transfusion there are potential risks, such as errors in patient identification, blood typing, cross-matching and other human errors”.  The fact that there is an upward trend in blood administration errors indicates that this is more likely a system failure rather than individual failure. But the issue must be determined because there are a multitude of reasons for why this is a system failure. Therefore, I would use the Lean Management principles in order to determine the root cause and develop a solution to the real problem. “The implementation of Lean is based on knowledge of the techniques and tools that allow process and/or activity improvement leading to optimization of those processes or activities thereby minimizing times, increasing profitability, adding value, etc., in short, improving client satisfaction” (Morell-Santandreu et al., 2021). Addressing this system failure using Lean Management principles would first involve a thorough value stream mapping of the entire blood administration process. This is so that the entire process can be simplified down into steps that can be easily visualized in order to identify potential and identify potential areas where errors are occurring. This would be followed by a root cause analysis, which begins by using tools such as a fishbone diagram or the “5 Whys” technique to get the root cause of the problem. The “5 Whys” technique would be utilized to dig deeper into the reasons behind the errors to make sure we are not just correcting a symptom, but really getting down to the root cause of the system failure. The next step would be retrieving data and analyzing it for any trends and correlations. It is also important to go to where the actual process is occurring, so doing a Gemba walk would provide firsthand experience into daily challenges and potential solutions. The PDSA (Plan-Do-Study-Act) cycle could be used to test and implement improvements. Through each iteration of the PDSA, data would be analyzed until the SMART goal is obtained. Then standardization of this process would be carried out through visual management techniques, and  training and educating staff to be competent in this new standardized process. By applying these Lean principles, the unit can work towards creating a more reliable, efficient, and safer blood administration system.

References

Morell-Santandreu, O., Santandreu-Mascarell, C., & Garcia-Sabater, , Julio J. (2021). A Model for the Implementation of Lean Improvements in Healthcare Environments as Applied in a Primary Care Center. International Journal of Environmental Research and Public Health, 18(6). https://doi.org/https://doi.org/10.3390/ijerph18062876

Najafpour, Z., Hasoumi, M., Behzadi, F., Mohamadi, E., Jafary, M., & Saeedi, M. (2017). Preventing blood transfusion failures: FMEA, an effective assessment method. BMC Health Services Research, 17. https://doi.org/https://doi.org/10.1186/s12913-017-2380-3